[Packaging composition]
l LH colloidal gold diagnostic reagent strip (for several persons)
l Instruction Manual (1 copy)
[Equipment required for testing]
l Timer
l Specimen collection container
【Steps】
You must read the instruction manual completely before testing, and restore the test strip and urine specimen to room temperature (18℃-30℃) before use.
1. Take out the reagent strip from the original aluminum foil bag and use it as soon as possible within 1 hour.
2. Insert the reagent strip into the urine specimen in the direction of the arrow. Note: The urine level cannot exceed the mark line of the test strip.
3. After at least 3-10 seconds, take it out and place it flat on a clean and flat surface; you don’t need to take it out and keep it in the urine cup until the result is read.
4. Wait for the fuchsia band to appear, the test result should be read within 3-5 minutes. It is invalid after 10 minutes.
[Result judgment]
Positive (+): Two red bands appear. One is located in the test area (T) and the other is located in the quality control area (C). And the T line is darker than the C line, or the C and T lines have the same intensity.
Negative (-): One or two red bands appear. One is located in the test area (T) and the other is located in the quality control area (C), but the T line is lighter than the C line, or no T line appears.
Invalid: There is no red band in the quality control area (C), indicating an incorrect operation process or the reagent strip has deteriorated or damaged. In this case, read the instructions carefully again and retest with a new test strip. If the problem persists, you should stop using this batch of products immediately and contact your local supplier.
Note: The color band of the quality control line of the reagent strip and the test line may show the color depth due to the amount of LH in the urine. The result is determined according to the above standards.
